BUILT BY AIRCRAFT MECHANICS, FOR AIRCRAFT MECHANICS
Full Line Of Shockbox Test Equipment
High Quality, Affordable Test Equipment Developed In-House For A Variety Of Aviation Maintenance Applications.
BROWSE OUR TEST BOXES
What Aircraft Testing Equipment Do You Need?
Capacitance Test Boxes
Landing Gear Breakout Boxes
Aircraft Specific Test Boxes
Capacitance Test Equipment
Shockbox Capacitance Test Boxes
Complete EBACS (Electronic Battery Analyzer/Charging System)
The same analyzer and software as the EBA built in with a dedicated PC and charger. This allows for charging a power supply/battery while testing and monitoring another one.
The EBA (Electronic Battery Analyzer)
A computer managed test box designed specifically for performing capacitance tests on various emergency power supplies and emergency batteries, including the PS-835, PS-850, PS-855 with its included adapter harness and numerous others using the included universal harness (shown).
The BFG Test Box
A simple, manually operated test box designed specifically to perform the capacitance test on PS-835, PS-850 & PS-855 power supplies.
Cessna 680 Emergency Lighting Capacitance Tester
No need to remove the emergency lighting power supplies from a Cessna 680 Sovereign to perform a capacitance test.
PS-834 Test Box
Designed specifically to perform an operational test and capacitance test of the BFGoodrich/L3 Communications PS-834 standby power supplies. Frequently used in Cessna 525 Citation Jet and Piper PA-46 Malibu aircraft.
GRIMES 60-3157-1 Test Box
This test box is used to perform an operational test and capacitance test of the Grimes 60-3157-1 emergency power supplies often found in older Beech 400, Mitsubishi Mu-300 and Airbus 300 series aircraft.
BFGoodrich 87-5106-2 (AP65-2)
Designed to perform the system check and standby power supplies capacitance test on Beechjet 400 aircraft with the BFGoodrich power supplies still installed in the aircraft. These are mounted underneath the cabin floor.
“As an avionics tech with over 28 years of experience, I can say that these test boxes are some of the best in the industry.”
Joe Gilmore
Avionics Tech at FAA Certified Repair Station
Landing Gear Test Equipment
Shockbox Landing Gear Breakout Boxes
Landing Gear Breakout Box
The Shockbox Landing Gear Breakout Box has been designed to be universal by adding a harness built specifically for your aircraft model to give you a powerful troubleshooting and rigging tool for your shop.
King Air Nose Landing Gear Test Box - TK1763-2/935SB
Designed straight from the King Air Maintenance Manual for aircraft with factory installed hydraulically controlled landing gear. It aids in the rigging of the nose gear actuator limit switches.
King Air Main Landing Gear Test Box - TK1763-5/935SB
Designed straight from the King Air Maintenance Manual for aircraft with factory installed hydraulically controlled landing gear. It aids in the rigging of the main gear actuator limit switches.
Task Specific Test Equipment
Shockbox Task Specific Aircraft Test Boxes
Mitsubishi Mu300 Electrical System Tester
If you are looking for the test box required to perform the Inverter System Test & Troubleshooting as described in chapter 24-21-00 of the Diamond 1/1A Mu300 Maintenance Manual, we have it!
Beech 400 Series Fire Extinguisher / Detection Tester
This test box is required to perform the “Fire Detection System Functional Test” as described in chapter 26-20-00 of the Beech 400/400A Maintenance Manual, that is required during a “C”-check inspection.
Grimes 60-2799 Series Strobe Power Supply Test Box
Our Grimes strobe power supply test box contains equivalent to Grimes G0056 Discharge Load Tester and G0047 Functional Tester in a single unit. Utilize our test box along with your Grimes Component Maintenance Manual to troubleshoot and repair these power supplies.
Grimes Test Strobe
To aid in troubleshooting Grimes strobe systems when you aren't sure if you have a bad strobe or a bad power supply. Disconnect the inoperative strobe and connect our test strobe. If the test strobe doesn't work, then you probably have a power supply problem.
Piaggio Landing Gear Limit Switches Test Box
TEM-326000-001SB
This box is required to perform Task 32-00-00-760-801 “Landing Gear Limit Switches – Electrical Test” as part of the ”B, C & D Inspections” in the Piaggio P180 Avanti Maintenance Manual (Report No. 9066). This test box is built to meet or exceed the design of the Piaggio Aerospace TEM-326000-001 Test Box.
AT YOUR SERVICE
Additional Benefits Of Our Quality Aviation Test Equipment!
International Shipping
Our customers are from all over the world. We can ship to your repair shop.
Reduce AOG
No more shipping off parts to be tested. Your aircraft can return to service within a few hours.
Reduce Costs
For Charter Operations and Aircraft Repair Stations who want to bring their testing in house and reduce costs.
5-Year Warranty
Backed by a five year warranty against manufacturing defects. You can count on quality test equipment.